primary slurry mixers
Our Machines
primary slurry mixers
Primary Slurry Mixers SLURRY MIXERS are used to formulate and thoroughly mix the ceramic Investment slurry.
The horizontal rotary barrel design is preferred for primary slurry as it can subject slurry formulation to continuous mixing action without heat buildup, evaporation and min or no foaming. Slurry of required viscosity and ratio can be formulated in the shortest possible time with minimal labour.
This is a rotating horizontal vessel type slurry mixer. The single drum of capacities up to 600Kgs of slurry depending on composition are available.
SLURRY MIXER
SLURRY MIXER is used to formulate and thoroughly mix the ceramic Investment slurry. The horizontal rotary barrel design is preferred for primary slurry as it can subject slurry formulation to continuous mixing action without heat buildup, evaporation and min or no foaming. This rotating horizontal barrel slurry mixer can accommodate up to 300Kgs of slurry depending on composition.
- Mixing time is settable 1 - 999hrs.
- Use of slurry transfer pumps is possible.
- A Feed hatch of Dia 200mm with lid for loading ceramic investment material is provided.
- The support structure is cast steel, with shafts precision machined, aligned and mounted on frictionless self-aligning bearings.
- An AC, 3 phase, reduction geared motor coupled with a chain-sprocket arrangement with appropriate safety cover drives the mixer.
- The mixing vessel can hold Up to 300 Kgs. Slurry subject to composition.
- Overall size 1200mm X 12 00mm X 1200mm Ht.
- A PVC ball valve, 500mm from ground level is slurry drain.
- A 1Hp, 3 phase, reduction geared motor with a chain & sprocket arrangement is vessel drive.
- A control panel with MCB, DOL, digital timers & status indicating tower lights are provided.
- The machine has functions in AUTO & Manual modes.
- The machine can run MIX or STORE functions in the AUTO mode. Cycle complete is indicated on the tower indicator lamps.
- Total Power :750W. (1hp)
